ABOUT ROBOT-SUPPORTED AUTOMATION TECHNOLOGY
- Defining tasks together
- Presenting solutions together
- Implementation through a competent
and reliable partner - Joint success through progress
... motivated and qualified staff.
Motivated, flexible and highly qualified staff is the
foundation of our joint success. Continuous further
training is required by ROBOT-TECHNOLOGY and
is the prerequisite for a qualified team in our sector.
... modern office buildings.
We provide a comfortable environment with modern work
equipment as the basis for successful project planning.
Meeting and training rooms with the latest media facilities
guarantee the corresponding success.
... spacious commissioning hall.
A well-equipped commissioning hall is the basis for quali-
fied commissioning. Large automation systems can be fully
assembled and tested at ROBOT-TECHNOLOGY.
... perfectly equipped laser robot assembly.
To guarantee high-value laser robot assembly, we made
some relevant investments which ensure the continued
high level of quality and record and monitor all important
performance data.
MODERN EQUIPPED ASSEMBLY HALL
ROBOT-TECHNOLOGY provides a modern assembly hall with around 3500 m² for building automation systems. For fast response times during in-house commissioning, all important processing machines are ready in mechanical production on an additional 500 m².
To carry out customer trials, e.g. for quality and cycle time studies, we have set up a complete laser cutting cabinet with our laser robot ROBOCUT A 300. The office space is around 1200 m² and is laid out for effective and customer-oriented order processing.
MOTIVATED AND HIGHLY QUALIFIED STAFF
ROBOT-TECHNOLOGY is a team of experienced employees who have all gained many years of knowledge in their area of responsibility.
In this way, you as a customer can be sure that you have a competent contact person at your side throughout the entire project phase.
Consistent training and continuous expansion of our staff numbers enables us to meet the growing requirements of the market. Further
core competences, such as electrical planning, switching cabinet construction, etc. are taken on by new employees.
OUR SERVICES AT A GLANCE
ROBOT-TECHNOLOGY is a competent partner for automation, Please refer to our service profile on the following pages. Besides actual
product development, we have our own design, project planning and commissioning teams. The mechanical components, such as
the building of plants and the production of robots, are done by us in-house. We have our own specialist teams especially for robot pro-
gramming and SPS control. Please see for yourself our capabilities on the following pages.
In-house development
We see all new requirements of our customers as
tasks which we solve fast and in a straightforward
manner through our experienced team. You then
benefit from constant innovations which we develop
in-house and bring to series production.
In the Design Department
All important assemblies are designed by ROBOT-TECHNOLOGY
in the internal Design Department. There are four modern work
stations with the 3D CAD software, Solid Works. To transfer
larger files, we use Odette, where the data formats CATIA, STEP,
IGES, Parasolid, DXF, DWG .... can be used.
Coordination and monitoring of your project
The foundations for the future plant quality and process
capability are usually established at a very early planning
stage. Our project teams coordinate and monitor your
project from the first hour to beyond delivery of the sys-
tem and are always at your service during this time.
The project team uses software modules for system sim-
ulation and scheduling.
Quality has top priority
Laser robots as core components of our laser cutting
system - in the production of our laser robot ROBOCUT,
the consistently high quality of the product is the top
priority. During assembly, all production procedures are
constantly checked and documented.
Assembly in a modern commissioning hall
At ROBOT-TECHNOLOGY, you find not only a modern
commissioning hall in which both standard systems and
also complex production lines can be built, but also
the right contact person at all times. Our staff is specially
trained in the separate areas, e.g. electric wiring, robot
programming and SPS programming.
Switching cabinets in no time
Switching cabinet construction starts with our own Electrical
Planning Department, which works with the software E-Plan.
Due to the short in-house channels, the switching cabinets
can then be tailored to our projects and requirements in no
time and with high quality standards.
Software for easy system operation
For both robot programmes and SPS programmes, we
have experienced specialists in-house who demonstrate
a great level of experience in the area of automation
technology. User interfaces for the individual application
areas were prepared by us and are available to you so
that you can easily operate the system.
Service team with many years of experience
Long-term customer satisfaction can only be achieved
by reliable and responsive service. At ROBOT TECHNOLOGY,
you have a well-educated service team with many years
of experience.
Our customers include production houses in the plastics
processing industry, which have adapted their production
to the requirements of the market by means of future-
oriented automation.
In addition to small and medium-sized companies, we
deliver automation systems to large companies groups
such as Volkswagen AG. Besides the automotive in-
dustry, our customers come from the areas of “white
goods” and the communications industry.
BMW
Continental
Dräxlmaier
Elring Klinger
Faurecia
Frimo
GM (Holden)
Greidenweis
Grupo Antolin
HQM Sachsenring
IAC
Ideal Automotive
Intier Eybl
Jenoptik
KB Components
Lear
Magna Spiegelsysteme
Mercedes-Benz
Montaplast
Peguform
Rehau
Reum
Röchling
Saint-Gobain
SMIA
Takata
Visteon
Volkswagen AG
Wexler
Yanfeng
COMPETENT CONTACT PERSONS WORLDWIDE
ROBOT-TECHNOLOGY is represented worldwide by competent sales partners who take on both the sale and service of our products. All
our partners are experienced companies in the area of cutting technology and have extensive knowledge in the area of laser technology.
In this way, you can be sure that you have a competent contact person at your side worldwide.
We are happy to name a relevant contact person for your company on request. Please send us an email under the heading Contact.
NORTH AMERICA
Dynamic Robotic Solutions, Inc.
1255 Harmon Road
USA-MI 48326 Auburn Hills
USA
Mr. Doug Cicchini
doug.cicchini@drsrobotics.com
Phone: + 1-248-8 29 28 83
UNITED KINGDOM
ATM AUTOMATION LTD.
Blaby Industrial Park Winchester
Avenue / Blaby Leisestershire
UK-LE8 4GZ
Mr. Sabir Hirji
shirji@atmautomation.com
Phone: + 44 (0) 116 277 3607
Fax: + 44 (0) 116 277 9800
AFRICA
S4 Integration
1 Leadwood Crescent, Fairview
ZA-6065 Port Elizabeth
South Africa
Andrew White
andrew@s4.co.za
Phone: +27 41 451 1250
Mobile: +27 82 655 5491
AUSTRALIA
LASER RESOURCES MANAGEMENT PTY LTD.
22 Jellico Drive
AUS-3179 Scoresby VIC
AUSTRALIA
Mr. Hugh Evans
hughe@laserresources.com.au
Phone: + 61-3-97 53 22 44